- 您现在的位置：买卖IC网 > Sheet目录841 > B82450A7004A000 (EPCOS Inc)COIL TRANSPONDER 7MH 3% SMD
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
5
06/12
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
B82462A4223K
INDUCTOR POWER 22UH 800MA SMD
B82462G2682M
INDUCTOR POWER 6.8UH 1.45A SMD
B82462G4222M
INDUCTOR POWER 2.2UH 2.55A SMD
B82464A4682M
INDUCTOR POWER 6.8UH 3.5A SMD
B82464G4104M
INDUCTOR POWER 100UH 1.05A SMD
B82464Z4684M
INDUCTOR POWER 680UH .42A SMD
B82472G4103M
INDUCTOR POWER 10UH 1.7A SMD
B82476A1102M
INDUCTOR POWER 1.0UH 6.8A SMD
相关代理商/技术参数
B82450A7004E
制造商:TDK-EPC 功能描述:TRANSPONDER 8MM 7 MH 3%
B82450A7204A000
功能描述:TRANSPONDER COIL 11MM 7.2MH 3% 制造商:epcos (tdk) 系列:- 零件状态:在售 频率:125kHz 特性:- 大小/尺寸:11.40mm 长 x 3.50mm 宽 x 2.40mm 高 标准包装:2,500
B82450A7204E000
功能描述:TRANSPONDER COIL 8MM 7.2MH 3% 制造商:epcos (tdk) 系列:- 零件状态:在售 频率:125kHz 特性:- 大小/尺寸:7.80mm 长 x 2.70mm 宽 x 2.70mm 高 标准包装:2,500
B82450H2364A
功能描述:TRANSPONDER COIL 2.36MH HQ SMD 制造商:epcos (tdk) 系列:- 包装:剪切带（CT） 零件状态:有效 频率:125kHz 规格:- 标准包装:1
B82451A2384D000
功能描述:RFID TRANSPONDER COIL 125KHZ SMT 制造商:epcos (tdk) 系列:- 包装:* 零件状态:有效 频率:125kHz 规格:- 标准包装:7,500
B82451L1004E402
功能描述:1mH Unshielded Wirewound Inductor 9 Ohm Nonstandard 制造商:epcos (tdk) 系列:B82451 包装:剪切带（CT） 零件状态:新产品 类型:绕线 材料 - 磁芯:铁氧体 电感:1mH 容差:±3% 额定电流:- 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:9 欧姆 不同频率时的 Q 值:55 @ 125kHz 频率 - 自谐振:30MHz 等级:AEC-Q200 工作温度:-40°C ~ 85°C 频率 - 测试:125kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.303" 长 x 0.291" 宽（7.70mm x 7.40mm） 高度 - 安装（最大值）:0.102"（2.60mm） 标准包装:1
B82451L1005E402
功能描述:10mH Unshielded Wirewound Inductor 104 Ohm Nonstandard 制造商:epcos (tdk) 系列:B82451 包装:剪切带（CT） 零件状态:新产品 类型:绕线 材料 - 磁芯:铁氧体 电感:10mH 容差:±3% 额定电流:- 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:104 欧姆 不同频率时的 Q 值:50 @ 125kHz 频率 - 自谐振:850kHz 等级:AEC-Q200 工作温度:-40°C ~ 85°C 频率 - 测试:125kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.303" 长 x 0.291" 宽（7.70mm x 7.40mm） 高度 - 安装（最大值）:0.104"（2.65mm） 标准包装:1
B82451L2364E402
功能描述:2.36mH Unshielded Wirewound Inductor 20 Ohm Nonstandard 制造商:epcos (tdk) 系列:B82451 包装:剪切带（CT） 零件状态:新产品 类型:绕线 材料 - 磁芯:铁氧体 电感:2.36mH 容差:±3% 额定电流:- 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:20 欧姆 不同频率时的 Q 值:55 @ 125kHz 频率 - 自谐振:2.2MHz 等级:AEC-Q200 工作温度:-40°C ~ 85°C 频率 - 测试:125kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.303" 长 x 0.291" 宽（7.70mm x 7.40mm） 高度 - 安装（最大值）:0.104"（2.65mm） 标准包装:1